Introduction

Tire changes are a common occurrence for many drivers. Whether you have a flat tire or are simply switching to a new set of tires for the season, it is important to know how to change your tires safely and efficiently.

Tools and materials needed

• Jack
• Lug wrench
• Spare tire
• Gloves

Steps

1. Park on a level surface and engage the parking brake.
2. Locate the spare tire and tools in your vehicle.
3. Remove the hubcap from the flat tire.
4. Loosen the lug nuts on the flat tire using the lug wrench.
5. Place the jack under the vehicle's jack point near the flat tire.
6. Raise the vehicle until the flat tire is off the ground.
7. Remove the lug nuts from the flat tire.
8. Remove the flat tire.
9. Place the spare tire on the wheel studs.
10. Hand-tighten the lug nuts.
11. Lower the vehicle to the ground.
12. Tighten the lug nuts using the lug wrench.
13. Replace the hubcap.
14. Store the flat tire and tools in your vehicle.

Tips

• It is important to follow the manufacturer's recommended tire pressure.
• If you are unsure of how to change your tires, you can always ask a professional for help.
• It is also a good idea to have your tires rotated every 5,000 to 8,000 miles.

Conclusion

Changing your tires can be a daunting task, but it is important to know how to do it in case of an emergency. By following these simple steps, you can safely and efficiently change your tires.

‍